The Worth Data Wedge Saver™ allows older legacy keyboard wedge bar code readers from such manufacturers as PSC, Metrologic, Symbol, Percon, and Worth Data to attach to a USB port. Users upgrading to new PCs or Macs that only have USB ports can use this device to bridge their older wedge readers with 6 pin mini din cable connection to their new USB computer system.

The Wedge Saver will operate on any computer with a USB port and Windows® 7, Vista, XP, 2000, ME, 98SE and even Mac OS - The Wedge Saver will attach to the computer as an USB keyboard device, and any bar code data will be transmitted to the computer as keyboard data - works with any application! The cost is only $49.00 with free same day shipping to the USA!

We guarantee it will work or your money back, no questions asked!

• Works with Percon, HHP Welch Allyn, PSC, Symbol®, Metrologic® and many others
• Gives new life to legacy PC wedge readers
• No need to buy a USB bar code reader
• Uses 6 pin mini-din cables
• USB 1.1 compliant
• Bus powered device - Hot swappable
• No driver required - Plug & Play
• Compatible with Windows, 7, Vista, XP, 2000, ME, 98SE and Mac OS
• 2 year warranty against defects in workmanship and materials
• Made in the USA
• Low cost - $49.00

Save That Old Wedge Reader
If your PC or Mac doesn't have a 6 pin mini din keyboard port and only has a USB port, you don't have to buy a new bar code reader. You can take that old PSC, Metrologic, Symbol or other keyboard interface wedge reader and attach it to your USB only PC using the Worth Data Wedge Saver. Your wedge reader then appears to the system as a USB HID keyboard. Data is transmitted as keyboard data; exactly like keyboard wedge data!

So don't throw away that wedge reader. It may be worth several hundred dollars and may have several years life yet. For only $49, you can continue to use it with a USB port indefinitely.

Non-Worth Data Wedge Readers
If your PSC Laser Reader, Symbol Laser Reader, Metrologic Laser Reader or other manufacturers wedge reader cable already has a male 6 pin mini din connector, you can plug it directly into the Wedge Saver. The Wedge Saver requires the wedge reader to be configured to output AT keyboard key codes. If you have a splitter "Y" cable, the other end just dangles, or you can cut it off sharply. For non-WDS readers, order the USBX option for $49.

Worth Data Readers
If you have a older Worth Data wedge reader, or Worthington Data Solutions reader, (WDP, TriCoder, MagReader), order the USBW option, and in addition to the Wedge Saver, you will receive a straight cable to connect from the wedge reader directly into the Wedge Saver. The following Worth Data bar code scanners are compatible with the Wedge Saver:

• WDP P11, WDP P12, WDP P11/12, WDP P01 (Non USB)
• T60, T61, T62, T63 TriCoders
• M61 Magstripe Scanners
• LZ100-WDP & LZ200-WDP Laser Scanners
• P16 CCD Scanners
• B61, B62, B68 RF Base Stations

Windows Configuration
Once you plug the Wedge Saver into a USB port, Windows will sense the presence of a new USB HID "human interface device" and will install the driver for the new device or prompt you to select the standard driver. When you scan a barcode, the data comes across the USB interface as keyed data and input into any application wherever you place your cursor. Of course the USB keyboard remains interchangeably usable.

PSC Readers, Symbol Readers, and Metrologic Readers are all compatible with the USBX Wedge Reader